Akron Polysys
Today is: August 23, 2014
Akron Polysys
Akron Polysys
Akron Polysys
Akron Polysys
You do not have the Flash plugin installed, or your browser does not support Javascript (you should enable it, perhaps?)
Akron Polysys
Akron Polysys

Composite Resins and Coatings

APS offers a series of thermally stable polymers that can be used to manufacture
fiber reinforced composites. These composite resins have been targeted for the
aerospace and defense industries.

PN – 400

Description:

PN - 400 is a phthalonitrile (PN) composite resin with exceptional high temperature stability. The processing parameters and properties of this material, which was originally developed for missile nose cone applications, can be found in U.S. Patent 7,642,336. An example procedure is described below. The phthalonitrile resin and M-APB amine catalyst was melted at 375°F and mixed at a ratio of 100:2.5 pbw.This mixture was then place under 1 mmHg vacuum at 375°F for approximately 5 minutes. Woven fabric was then pre-impregnated at 375°F using a hot melt, solvent-less method. Layers of the pre-impregnated quartz fabric were layed up in layers to achieve final part thickness. The pre-impregnated lay-up was then vacuum bagged using FLUORPEEL TEFLON coated glass bleeder and high temperature nylon bagging film. The lay up was cured in an autoclave with temperature ramping to 400°F at 2-5°F/minute. At 200°F, 80- 85 psi of autoclave N2 pressure was applied. The part was then cured at 400°F for 12 hours and 80 psi N2. The laminate was then post cured in an N 2 oven. The oven was temperature ramped to 450°F at 2- 5°F/min with a two hour soak at temperature. The oven was then ramped to 615°F with a 6 hour soak.  The oven was then ramped to 715°F with an 8 hour soak.

FOR MORE DETAILS CONCERNING THIS PRODUCT ? » CLICK HERE

APS-C1 Anti-Wear Coating Resin

Description:

APS-C1 is a resin developed specifically for an abrasion resistance coating that can be applied to high temperature composite surfaces to dramatically reduce friction wear.

FOR MORE DETAILS CONCERNING THIS PRODUCT ? » CLICK HERE

« BACK
Akron Polysys
LATEST NEWS
December 15, 2013
PATENT POWER: Strong Ideas Start Here
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
October 09, 2013
Akron Polymer Installs Film Casting Line
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
August 07, 2012
Liquid Crystal Institute receives grant for technological development research within Ohio
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
May 09, 2012
New Downtown Akron Business Opens Its Headquarters
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
November 01, 2011
Thinking Outside the Wallet
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
May 01, 2011
Akron Polymer Expands
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
November 15, 2010
Northeast Ohio Develops Plan to Become Global Epicenter of Flexible Electronics Industry
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
July 01, 2010
Akron Polymer rides growth, plans new $3-million building
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
January 08, 2010
Ohio Leads the Way for Start-Up Business Success in the Polymer Industry:
» READ MORE
Akron Polysys Akron Polysys Akron Polysys
Akron Polysys
» VIEW FULL NEWS LIBRARY
Akron Polysys
Akron Polymer Systems
Akron Polymer Systems
Akron Polymer Systems
Akron Polymer Systems